As we know, a radio control car model is armed with acraft and as such, each has different techniques. When our model line is thesame but I try to convey my experience in the implementation of the new andfamous vinyl, and I use it daily for plotting posters, vehicles or windows.As this material is China Reflective Sheeting films Suppliers self-adhesive plate not need any.Only use a sprayer (loaded with water and a few drops of detergent), a plasticspatula (like those used by panel beaters and are sold at most hardwarestores). To this, we can cover with a cotton cloth, not to shred the vinyl. Wecan also help with a rag ball (like that used by the ancient furniturepolishes, they called dolls). And also need paper masking tape.The film is composed of two parts: the support and thevinyl itself.

The application technique of vinyl is as follows:ü Oncethe vinyl located exactly on the radio control car place you want to cover,bound him with tape, by the medium in the narrowest part.ü Next,lift one side, peel off the vinyl holder and cut the latter. This is where youstart to sweat. Do not worry, this is a good sign.ü Here wecan do one of two things: One is to spray a little water with detergent and theother is not to put anything and move forward with bonding, helping with thespatula or wrist. The past should be perpendicular to the hand holding thevinyl. So, if we maintain the right, pass left the spatula up and down and notthe hand holding the vinyl.The spraying is simply because if we want to go backinto the paste. In this way the damage will be lower in the wood.

In contrast,if we put vinyl on radio control car, I advise spraying, so that there is noballoon. If there were any, we stuck with a needle. The water does not removevinyl glue adhesion. Within days, it will evaporate and the vinyl will becompletely stuck. This is another thing to bear in mind because if you spraytoo, it is advisable not to go the next day to fly because we can stay freein-flight vinyl. We wait a couple of days.Well, we already have half of the vinyl stuck. We needthe other half. We take the tape, take off the radio control car bracketfrom the center out and spend the spatula in the same way as before. There isso much more to add, but I will not bore you and truly hope that mypresentation will be useful.